From XXXXXXX Polymers TX Grease Application
I just wanted to give you a brief update on our application of the nano-oil. We have used the oil in one of our largest, most severe duty pumps to best be able to tell any effect. The system is a 700 HP, 4160 V pump that runs 24/7/365.
We took amperage readings before and after applying the nano-oil and initial results show a 1 A drop, which translates to approx 63,000 kWh savings per year. We are going to continue monitoring both amperage and vibration readings on the pump, to see what the final overall effect is.
Christian StClaire's response:
I cannot tell you how pleased I am to hear that you were able to put Nano-Oil to practice/work for you, obviously the amp reading is talking to you, the savings alone may or may not be of great importance to you/company however it is my opinion and educated guess that the unit in question that you treated will have a much higher MTBF.
Further, not being familiar with the unit, I have to ask is there another area in the system that could be treated, those could include bushings/bearings on the the motor itself which would translate into another level of efficiency, question: have you ever been impacted by the motor failure ever?
Also were you able to take temperature readings on the treated area before and after?